5x10/100Base-T(X) ports which is fully compliant with IP-67 standards. IES-2050A is with rigid IP30 housing design and wide operating temperature range from -40 to 70°C.
IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3x for Flow control IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table
1024 MAC addresses
Priority Queues
4
Processing
Store-and-Forward
Switch Properties
Switching bandwidth : 1.0Gbps VLAN : Port Based
Security Features
Enable/disable ports VLAN to segregate and secure network traffic
Software Features
STP/RSTP (IEEE 802.1D/w) Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units DHCP Client Port base VLAN LLDP (Link Layer Discovery Protocol) Port configuration, status, statistics, monitoring, security SNMP v1/v2c/v3 and private MIB support
Network Redundancy
O-Ring Open-Ring O-Chain STP RSTP Fast Recovery
DIP-Switch Setting
P.F.
When power fault enable relay warning system (On : Enable, Off : Disable function)
R.E.
Enable/Disable O-Ring function (On : Enable, Off : Disable)
R.M.
Enable/Disable Ring Master Mode (On : Enable, Off : Disable)
R.S.
O-Ring redundant port select (On : ring port set to port-1 and port-5, Off : ring port set to port-1 and port-2)
LED Indicators
Power Indicator
Green LED x 2
R.M. Indicator
Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator
Green : Indicates port operated in O-Ring mode
Fault Indicator
Amber : Indicates unexpected event occurred
10/100Base-T(X) RJ45 Port Indicator
Green for port Link/Act. Amber for Duplex/Collision
Fault Contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power
Dual 12~ 48 VDC power input on 6-pin terminal block
